Input/Counter Drive Bearing 323232-A
Also fits Mitsubishi F1CJB
-
Helps cure:
- Bearing noise
- Bearing failure
This combination of filters has no results. You can either remove them one by one, or clear all filters using the button below.
Internal
Primary Pulley Front Bearing 323235-C
Fits units paired to engines 1.6L or over only. Also fits Mitsubishi F1CJB.
-
Helps cure:
- Bearing noise
- Bearing failure
- Push belt slippage
Secondary Pulley Front Bearing 323264-A
Also fits Mitsubishi F1CJB.
-
Helps cure:
- Bearing noise
- Bearing failure
- Push belt slippage
Secondary Pulley Rear Bearing 323229-A
Also fits Mitsubishi F1CJB.
-
Helps cure:
- Bearing noise
- Bearing failure
- Push belt slippage
Pump
Oversized Pump Flow Control Valve 33510N-01
Fits '07-later. Also fits Mitsubishi F1CJA and F1CJB.
-
Helps cure:
- Push belt slippage
- Delayed engagement
- Low pump volume
-
Tooling:
- F-33510N-TL
- VB-FIX
Pump Flow Control Valve 33510N-02
Valve Body
(View Valve Body Layout Diagram)
Lockup Control Plunger Valve Kit 113741-11K
Oversized Lockup Control & Plunger Valve Kit 33741F-09K
Also fits Mitsubishi F1CJB
-
Helps cure:
- Jerking on coastdown
- Harsh engagement
- High engine RPM
- No lockup
-
Tooling:
- F-33741F-TL9
- VB-FIX
Oversized Primary Pulley Regulator Valve Kit 33741F-02K
Also fits Mitsubishi FICJB
-
Helps cure:
- Chatter on acceleration
- Damaged valve body casting
- High line pressure
- Low line pressure
- Pulley breakage
- Slips in Forward & Reverse
-
Tooling:
- F-33741F-TL2
- VB-FIX
Oversized Secondary Pulley/Pressure Regulator Valve Kit 33741F-01K
Also fits Mitsubishi FICJB
-
Helps cure:
- Push belt slippage
- Pulley breakage
- RPM surge
- Chatter on acceleration
-
Tooling:
- F-33741F-TL
- VB-FIX
Oversized Solenoid Regulator Valve Kit 33741F-03K
Also fits Mitsubishi FICJB
-
Helps cure:
- Chatter on acceleration
- Noise on acceleration
- Push belt slippage
- Increased push belt & pulley wear
- Low line rise
- Low solenoid feed pressure
- No ratio change
-
Tooling:
- F-33741F-TL3
- VB-FIX
Oversized Torque Converter Lube Regulator & Plunger Valve Kit 33741F-05K
Also fits Mitsubishi F1CJB. There are two versions of the torque converter lube regulator valve bore lineup. The one more commonly found in the USA has a plunger valve and sleeve. The other version, more commonly found outside of the USA, does not utilize this plunger valve and sleeve.
-
Helps cure:
- Engine stall on engagement
- Increased RPM during acceleration
- No lockup
- Overheated fluid
- Poor fuel economy
- Poor lube oil control
- Poor performance
- Ratio codes
-
Tooling:
- F-33741F-TL4
- VB-FIX
Oversized Torque Converter Lube Regulator Valve Kit 33741F-04K
For valve assemblies without plunger valve & sleeve. Also fits Mitsubishi FICJB.
-
Helps cure:
- Engine stall on engagement
- Increased RPM during acceleration
- No lockup
- Overheated fluid
- Poor fuel economy
- Poor lube oil control
- Poor performance
- Ratio codes
-
Tooling:
- F-33741F-TL4
- VB-FIX
Tech Resources
January 25, 2023
Uncovering the Root Cause of Pressure & Complaints – The Critical Role of Solenoid Modulator & AFL Valves
Maura Stafford
November 17, 2017
Jatco/Nissan JF015E (RE0F11A) Vacuum Test Guide
October 09, 2017
Jatco/Nissan JF015E (RE0F11A) Valve Body Layout
March 28, 2017
CVT Success: In-Vehicle Isolation of Common Problems
Bob Warnke