Jatco/Nissan JF015E (RE0F11A) Valve Body Layout
Sonnax valve body layouts provide a detailed overview of individual units making it quick and easy to determine what’s available for the specific valve body you’re working on. Each layout:
- Displays an exploded view location guide for individual valve trains
- Identifies symptoms and recommended solutions for quality rebuilds
- Provides active links to view specific part details
- Lists any tools/fixtures required for part installation
- Illustrates correct part orientation
With more than 60 layouts to choose from, these convenient, go-to reference guides are valuable resources for any shop.
Click here to view PDF if the tech resource does not appear below.
Related Units
Related Parts
Required
Recommended
Required
Recommended
JF011E (RE0F10A), JF015E (RE0F11A), JF016E (RE0F10D), JF017E (RE0F10E)
Oversized Pump Flow Control Valve 33510N-01
Fits '07-later. Also fits Mitsubishi F1CJA and F1CJB.
-
Helps cure:
- Push belt slippage
- Delayed engagement
- Low pump volume
Required
Recommended
Required
Recommended
JF015E (RE0F11A)
Oversized Solenoid Regulator Valve Kit 33741F-03K
Also fits Mitsubishi FICJB
-
Helps cure:
- Chatter on acceleration
- Noise on acceleration
- Push belt slippage
- Increased push belt & pulley wear
- Low line rise
- Low solenoid feed pressure
- No ratio change
Required
Recommended
JF015E (RE0F11A)
Oversized Torque Converter Lube Regulator Valve Kit 33741F-04K
For valve assemblies without plunger valve & sleeve. Also fits Mitsubishi FICJB.
-
Helps cure:
- Engine stall on engagement
- Increased RPM during acceleration
- No lockup
- Overheated fluid
- Poor fuel economy
- Poor lube oil control
- Poor performance
- Ratio codes
Required
Recommended
JF015E (RE0F11A)
Oversized Secondary Pulley/Pressure Regulator Valve Kit 33741F-01K
Also fits Mitsubishi FICJB
-
Helps cure:
- Push belt slippage
- Pulley breakage
- RPM surge
- Chatter on acceleration
Required
Recommended
JF015E (RE0F11A)
Oversized Primary Pulley Regulator Valve Kit 33741F-02K
Also fits Mitsubishi FICJB
-
Helps cure:
- Chatter on acceleration
- Damaged valve body casting
- High line pressure
- Low line pressure
- Pulley breakage
- Slips in Forward & Reverse
Required
Recommended
JF015E (RE0F11A)
Oversized Lockup Control & Plunger Valve Kit 33741F-09K
Also fits Mitsubishi F1CJB
-
Helps cure:
- Jerking on coastdown
- Harsh engagement
- High engine RPM
- No lockup
Required
Recommended
JF015E (RE0F11A)
Oversized Torque Converter Lube Regulator & Plunger Valve Kit 33741F-05K
Also fits Mitsubishi F1CJB. There are two versions of the torque converter lube regulator valve bore lineup. The one more commonly found in the USA has a plunger valve and sleeve. The other version, more commonly found outside of the USA, does not utilize this plunger valve and sleeve.
-
Helps cure:
- Engine stall on engagement
- Increased RPM during acceleration
- No lockup
- Overheated fluid
- Poor fuel economy
- Poor lube oil control
- Poor performance
- Ratio codes
While Sonnax makes every effort to ensure the accuracy of technical articles at time of publication, we assume no liability for inaccuracies or for information which may become outdated or obsolete over time.