The GM 6L80 transmission in '10-later Camaros and many GM trucks uses a 300mm converter. The large diameter and weight of this "JBMX" converter rob the drivetrain of acceleration power and throttle response. The Sonnax 300mm performance converter kit GM-RK-16 adapts a GM 245mm core for use in GM 6L80-E (300mm) applications, allowing converter builders to assemble high performance GM 6L80 converters with a variety of stall speed options. The diameter of the finished converter using the GM-RK-16 is 1.600" (40mm) smaller, which improves acceleration.

The robust Sonnax forged cover has additional material on the flexplate mounting pads and rim to reduce cover flexing and ballooning during hard acceleration. This cover also incorporates universal features: three different flexplate bolt hole patterns and a weld-on pilot for use with other GM applications.

The GM-RK-16 kit utilizes the OE GM 258mm damper assembly to isolate engine and road vibration and to protect the transmission parts downstream. Many other aftermarket performance converter kits offer pistons without dampers, which will compromise ride quality for street use and severely reduce the transmission and converter life. Two damper assembly options are available with this performance converter kit: forged piston GM-DA-6P assembled with a used GM 258mm damper assembly or a salvaged OE 258mm converter piston/damper.

The GM-RK-16 performance converter kit is designed to fit either Sonnax stator GM-ST-082 or GM-ST-086, along with a sprag cartridge GM-CS-5 that fits the GM 6L80 stator shaft spline. Instructions to cut and weld the 245mm turbine to accept the turbine hub are included in the kit.

• Improved acceleration and throttle response
• Adapts the popular GM 245mm converter core
• Includes heavy duty front cover
• Fits 9.674" (245mm), 11.062" (281mm) and 11.500" (292mm) flexplate bolt patterns
• Weld-on pilot adapts to many applications
• Chromoly steel turbine and impeller hubs

Required Piston Damper Assembly Parts

OPTION #1:

• GM-DA-6P Piston Plate
• GM-RV-9 Piston/Damper Plate Rivets (100/bag)
• S20300WC, B45300HTE or B45070HTE Friction Ring
• GM 258mm Damper Assembly Core

OPTION #2:

• GM 258mm Piston/Damper Assembly

Required Stator Assembly Parts

• CH-N-1 Thrust Bearing (2)
• GM-CS-5 Sprag Cartridge
• GM-ST-082 or GM-ST-086 Stator

Required OE Core Parts

• GM 245mm Impeller
• GM 245mm Turbine (requires machining)

Optional Assembly Parts

B78 Converter Bolts (100/bag)