AODE, 4R70W/75W Valve Body Identification
Valve Body Xpress
Part Number Chart
| Part Number | Description |
|---|---|
| F091 (Warranty Only) | AODE, ’92 |
| F092 | AODE, ’93– ’95 |
| F093 (Warranty Only) | 4R70W, ’96– ’97, Soft Wire Harness |
| F094 | 4R70W, ’98–’00, Molded Lead Frame Harness |
| F095, F095HD | 4R70E/4R70W/75W/75E, ’01– ’08, Molded Lead Frame Harness |
| F098, F098HD | 4R70E/4R70W/75W/75E, ’09-Later, Soft Wire Harness |
’92-’00 Identification
Casting Number
- 1992 has 13mm dowel pins and an F2 Rough Forging Number.
- 1993-1995 have 13mm dowel pins and an F3 Rough Forging Number.
- 1996-2000 have 10mm dowel pins and an F6 Rough Forging Number.
- To identify if you have a ’96-’97 or a ’98-’00, use the solenoid identification. The ’96-’97 use a wired harness. The ’98-’00 uses a solid harness.
The Casting Number is located under the plate. See RED ARROW for location.
Solenoid Type Identification
| Molded Lead Frame Harness | Soft Wire Harness |
|---|---|
 |  |
4R70W, ’98-Later Identification
The valve body stiffener plate in the 2-3 accumulator area was eliminated on ’01-later Ford 4R70E, 4R70W, 4R75E and 4R75W transmissions. Sonnax adds a custom 2-3 accumulator support plate on these valve bodies. The addition of this plate eliminates separator plate cracking and cross-leaking.
| ’98–’00 F094 | ’01-Later F095, F095HD |
|---|---|
 |
|
| The ’98-’00 will have a hole inside the plate. See the arrow above. | ’01-Later will have a hole just to the rear of the small plate. See arrow above. |
Related Units
Related Parts
Required
Recommended
4R70E, 4R70W, 4R75E, 4R75W
Remanufactured Valve Body F095
’01–’08, includes solenoids
Required
Recommended
4R70E, 4R70W, 4R75E, 4R75W
Remanufactured Valve Body F098
’09-Later, includes solenoids
While Sonnax makes every effort to ensure the accuracy of technical articles at time of publication, we assume no liability for inaccuracies or for information which may become outdated or obsolete over time.