January 01, 2013
AODE, 4R70W/75W Valve Body Identification
Valve Body Xpress
AODE, 4R70W/75W Valve Body Identification
Part Number Chart
| Part Number | Description |
|---|---|
| F091 (Warranty Only) | AODE, ’92 |
| F092 | AODE, ’93– ’95 |
| F093 (Warranty Only) | 4R70W, ’96– ’97, Soft Wire Harness |
| F094 | 4R70W, ’98–’00, Molded Lead Frame Harness |
| F095, F095HD | 4R70E/4R70W/75W/75E, ’01– ’08, Molded Lead Frame Harness |
| F098, F098HD | 4R70E/4R70W/75W/75E, ’09-Later, Soft Wire Harness |
’92-’00 Identification
Casting Number
- 1992 has 13mm dowel pins and an F2 Rough Forging Number.
- 1993-1995 have 13mm dowel pins and an F3 Rough Forging Number.
- 1996-2000 have 10mm dowel pins and an F6 Rough Forging Number.
- To identify if you have a ’96-’97 or a ’98-’00, use the solenoid identification. The ’96-’97 use a wired harness. The ’98-’00 uses a solid harness.
The Casting Number is located under the plate. See RED ARROW for location.
Solenoid Type Identification
| Molded Lead Frame Harness | Soft Wire Harness |
|---|---|
 |  |
4R70W, ’98-Later Identification
The valve body stiffener plate in the 2-3 accumulator area was eliminated on ’01-later Ford 4R70E, 4R70W, 4R75E and 4R75W transmissions. Sonnax adds a custom 2-3 accumulator support plate on these valve bodies. The addition of this plate eliminates separator plate cracking and cross-leaking.
| ’98–’00 F094 | ’01-Later F095, F095HD |
|---|---|
 |
|
| The ’98-’00 will have a hole inside the plate. See the arrow above. | ’01-Later will have a hole just to the rear of the small plate. See arrow above. |
