Chrysler A727, A904 Throttle Link Adjustment
Valve Body Xpress
- Make sure the throttle body or carburetor linkage is at lowest idle position. If you cannot get the throttle body or carburetor to return to the lowest idle position, it may be necessary to disconnect the throttle linkage from the transmission throttle valve lever. This sometimes happens if linkage is severely out of adjustment.
- Use a plastic wire tie to hole the linkage in the low idle position.
- Raise the vehicle on a lift and loosen the lock screw on the linkage swivel.
- Disconnect the linkage swivel from the throttle lever.
- Hold the throttle lever towards the front of the transmission as far as it will go.
- Adjust the swivel so that it will just slip onto the throttle valve lever.
- Tighten the lock screw.
- Lower the vehicle and remove the wire tie.
Related Units
Related Parts
While Sonnax makes every effort to ensure the accuracy of technical articles at time of publication, we assume no liability for inaccuracies or for information which may become outdated or obsolete over time.