July 01, 2020
Always Identify These Valve Bodies BEFORE You Start a Transmission Rebuild
Andrew Jessiman
Generation 1 | Generation 2 | Generation 3 |
Front Pump |
Generation 1 | Generation 2 | Generation 3 |
View of Pressure Regulator Valve in Pump Port |
Generation 1 | Generation 2 & 3 |
Main Valve Body, Lower Side |
Generation 1 | Generation 2 & 3 |
Valve Body, Upper Cover |
Generation 1 | Generation 2 & 3 |
| |
Note channel casting worm track variations between Gen. 1 and Gen. 2 & 3. Gen. 2 & 3 include pockets for 5 signal accumulator pistons. |
Generation 1 | Generation 2 & 3 |
TEHCM, Lower Side |
Generation 1 | Generation 2 |
TEHCM, Upper Side |
Generation 1 | Generation 2 & 3 |
TEHCM ID Plate |
July 01, 2020
Andrew Jessiman
Required
Recommended
Required
Recommended
Required
Recommended
While Sonnax makes every effort to ensure the accuracy of technical articles at time of publication, we assume no liability for inaccuracies or for information which may become outdated or obsolete over time.