March 23, 2016
Six Ways from Sunday: Diagnosing ZF6 & Ford 6R60/80 TC-Related Drivability Concerns
Bob Warnke
Symptoms:
- Bushing wear
- Bushing failure
- Ratio codes
Cause:
OE bushing material composition allows premature wear.Correction:
Install improved Sonnax bushing kit to restore critical clearances and resist untimely wear.Warning:
Use of an arbor press is required for correct installation. Do not use a hydraulic press or a bushing driver/hammer combination to install, as doing so may distort the bushing and cause fitment issues.
6R80 (2009–2014), 6R80 (2015-Later)
Bushing Kit
Part No. 95030-80K
Find a Distributor
OE bushings in Ford 6R80 transmissions have a tendency to wear out prematurely due to sub-optimal material composition. This wear can lead to bushing failure, loss of correct pressure to various clutches and gear ratio or solenoid codes. Sonnax offers improved bushing kit 95030-80K to restore worry-free operation.
- Upgraded material composition outperforms OE bushing
- Superior wear characteristics eliminate premature deterioration
- Rear Stator Support Bushing 1.180" Shaft Journal
- "A" Drum Front Bushing 2.352" Shaft Journal
- "A" Drum Rear Bushing 1.966" Shaft Journal
- Input/Output Shaft Bushings (2) .669" Shaft Journal
- Front Sun Gear Shaft Bushing .952" Shaft Journal
- Rear Sun Gear Shaft Bushing, .952" Shaft Journal
- "B"/Direct Clutch Bushings (2) 1.337" Shaft Journal
- Bushing Style: Precision
- Material: Steel-backed alloy
January 29, 2020
Bushwhacked! Keys to Avoiding Preventable Bushing Problems
Brian Wing
Related Sonnax Parts
Required
Recommended
ZF6HP19, ZF6HP26, ZF6HP28
"A" Drum Front Bushing 95030-03
Fits 2.353" (59.77mm) diameter shaft journals only.
- Bushing Style: Precision
- Material: Steel-backed alloy
- Width: 0.315"
- Housing Bore: 2.481"
- Shaft Dia.: 2.353"
-
Helps cure:
- Bushing wear
- Bushing failure
Required
Recommended
ZF6HP19, ZF6HP26, ZF6HP28
"A" Drum Rear Bushing 95030-04
Fits 1.967" (49.97mm) dia. shaft journals only.
- Bushing Style: Precision
- Material: Steel-backed alloy
- Housing Bore: 2.088"
- Shaft Dia.: 1.967"
- Width: 0.307"
-
Helps cure:
- Bushing wear
- Bushing failure
Required
Recommended
6R80 (2009–2014), ZF6HP26, ZF6HP28
"B"/Direct Clutch Bushing 95030-07
Fits units with 1.337" (33.97mm) dia. shaft journals only.
- Bushing Style: Precision
- Material: Steel-backed alloy
- Housing Bore: 1.457"
- Shaft Dia.: 1.337"
- Width: 0.465"
-
Helps cure:
- Bushing wear
- Bushing failure
- B Clutch burned
- Direct clutch burned
- Ratio codes
Required
Recommended
6R80 (2009–2014), 6R80 (2015-Later)
Front Sun Gear Shaft Bushing 95030-06F
- Bushing Style: Precision
- Material: Steel-backed alloy
- Housing Bore: 1.062"
- Shaft Dia.: 0.952"
- Width: 0.384"
-
Helps cure:
- Bushing wear
- Bushing failure
- Ratio codes
Required
Recommended
6R80 (2009–2014), 6R80 (2015-Later), ZF6HP19, ZF6HP26, ZF6HP28
Input/Output Shaft Bushing 95030-05
Fits units with .669" (16.98mm) dia. shaft journals only.
- Bushing Style: Precision
- Material: Steel-backed alloy
- Housing Bore: 0.788"
- Shaft Dia.: 0.669"
- Width: 0.393"
-
Helps cure:
- Bushing wear
- Bushing failure
- Ratio codes
- B Clutch burned
Required
Recommended
6R80 (2009–2014), 6R80 (2015-Later), ZF6HP26, ZF6HP28
Rear Stator Support Bushing 95030-02
Fits 1.180" (29.96mm) dia. input shaft journal only.
- Bushing Style: Precision
- Material: Steel-backed alloy
- Housing Bore: 1.300"
- Shaft Dia.: 1.180"
- Width: 0.697"
-
Helps cure:
- E Clutch burned
- Gear ratio & solenoid codes
- Bushing wear
- Bushing failure
Required
Recommended
6R80 (2009–2014), 6R80 (2015-Later)
Rear Sun Gear Shaft Bushing 95030-06E
- Bushing Style: Precision
- Material: Steel-backed alloy
- Housing Bore: 1.063"
- Shaft Dia.: 0.952"
- Width: 0.384"
-
Helps cure:
- Bushing wear
- Bushing failure
- Ratio codes